Ideal Pet 80VPPXLW Manuel d'instructions télécharger pdf (Page 8)

Page 8

First, clean the surface of frame with

household glass cleaner, then starting

at top, attach Draft•Seal™ by aligning

edge so that it rubs lightly against glass.

(see Picture #24) Pull paper off tape

and gently press in place while working

slowly down the Draft•Seal™.

Do not press too firmly in the event that

repositioning is necessary. Be sure that

vinyl rubs lightly against glass all the way

down length of glass. Press Draft•Seal™

firmly in place along entire length when

you are satisfied it is correctly placed.

NOTE: If the sliding door portion of your vinyl patio door is not plumb with the Vinyl Pet Door Panel, you may need to adjust the

bottom rollers on the sliding vinyl patio door. Please refer to the manufacturers adjustment instructions for your specific vinyl

sliding patio door style.

Part # 909 1042-Rev. U 212

We recommend caulking around entire pet panel, inside and outside,

to insure the best possible weather seal

Finishing the Installation

Step #9-Attaching the Draft•Seal™

and Optional Sliding Door Adjustments

The Draft•Seal™ (combined in 2 pieces) attaches to the moving section of your sliding glass door. To install

the Draft•Seal™, measure the vertical distance, or height of exposed glass between top and bottom frames

of the sliding door and using this length, cut Draft•Seal™ to size with scissors.

1 2 3 4 5 6 7 8

Pas de commentaire

Ideal Pet 80VPPXLW Manuel d'instructions Page 8