Ideal Pet 80VPPXLW Manuel d'instructions télécharger pdf (Page 3)

WALL

Spacers

Hanger

2 (#10 x 1-1/2”)

Screws

Patio Door Inside Frame

Installing Your White Vinyl Patio Pet Door (continued)

Step #2 – Measuring the “H” Section Gap (5/16”)

Page 3

Continue to Page 4...

Measure the distance from the

edge of pet door panel to edge

of “H” section. (see Picture #6)

This distance should be 5/16”.

If it is less than 5/16” you need

to determine how many spacers

will be needed to install

between the hangers and the

inside of the sliding patio door

frame to correct the distance.

(see Sketch B)

Sketch B

/16”

Minimum

Note: You have been

provided with 6 spacers

of two thicknesses.

There are...

4 each at 1/16” and

2 each at 1/4”

NOTE: Far end spring will have to

be held down to allow “H” Section

to slide over spring.

Insert top “H” section

on top of pet door panel

(see Picture #4) until it is

flush to frame.

(see Picture #5)

NOTE: “H” Section

must be flush

with outer frame.

Slide “H” Section to edge of door frame.

(Do not slide into channel)

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Ideal Pet 80VPPXLW Manuel d'instructions Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Soins des animaux Ideal Pet 80VPPXLW